Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA1999626 ES, 2.5 D, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 72 (STEERING COLUMN SWITCHES)CENTRAL SECURITY MODULE REMOVAL/INSTALLATION
1999 Mazda 626 ES, 2.5 D, Standard
Central Security Module Removal/Installation
1999 Mazda 626 ES, 2.5 D, StandardSECTION Central Security Module Removal/Installation
WARNING: This page is about a different car, the 2002 Mazda B4000, 2002 Mazda B3000, and 2002 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Electronic modules are sensitive to electrical charges. If exposed to these charges, damage may result.
- Disconnect the negative battery cable.
- Remove the passenger air bag module. See PASSENGER-SIDE AIR BAG MODULE .
- Reposition the central security module.
- Remove the three screws.
- Pull the central security module straight out from the bracket.
- Disconnect the two electrical connectors.
- Remove the bracket from the central security module.
- To install, reverse the removal procedure.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.