PID/Data Monitor Table [Multiplex Communication System]

1999 Mazda 626 ES, 2.5 D, StandardSECTION PID/Data Monitor Table [Multiplex Communication System]
WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
PID/DATA MONITOR

PID name (definition) Condition Specification PID monitor module Terminal
ABS_MSG (Missing message from the ABS/TCS HU/CM Present Circuit in the ABS/TCS HU/CM is normal Instrument cluster
  • ABS/TCS HU/CM: O, R
  • Instrument cluster: 2W, 2X
Not Present Circuit in the ABS/TCS HU/CM is abnormal
PCM_MSG (Missing message from the PCM) Present Circuit in the PCM is normal
  • ABS/TCS HU/CM
  • Instrument cluster
Not Present Circuit in the PCM is abnormal
TCM_MSG (Missing message from the TCM) Present Circuit in the TCM is normal
  • ABS/TCS HU/CM
  • Instrument cluster
Not Present Circuit in the TCM is abnormal
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.