Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA1999626 ES, 2.5 D, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 296 (POWER STEERING SYSTEM)STEERING GEARINSTALLATION
1999 Mazda 626 ES, 2.5 D, Standard
Steering Gear: Installation
1999 Mazda 626 ES, 2.5 D, StandardSECTION Installation
WARNING: This page is about a different car, the 2003 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
All Vehicles
NOTE:
- With the mounting bolts removed, slide the gear rearward to connect the steering coupling to the steering gear shaft.
- Position the steering gear in the vehicle.
- Lower the hoist.
- Install the two steering gear mounting bolts.
- Install the steering shaft boot.
- Install the steering shaft.
- Install the power steering pressure and return line bracket bolts.
- Raise the vehicle on the hoist.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.