Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA1998626 LX L4-2.0L DOHCREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSFRONT CROSS-MEMBER
1998 Mazda 626 LX L4-2.0L DOHC
Front Cross-Member
1998 Mazda 626 LX L4-2.0L DOHCSECTION Front Cross-Member
FRONT:
Mounting Nuts 94 - 131 Nm (68.8 - 96.9 ft. lbs.)
Mounting Bolts 94 - 131 Nm (68.8 - 96.9 ft. lbs.)
REAR:
Mounting Bolts 37 - 56 Nm (27 - 41 ft. lbs.)
Mounting Nuts 94 - 131 Nm (68.8 - 96.9 ft. lbs.)
Mounting Bolts 94 - 131 Nm (68.8 - 96.9 ft. lbs.)
REAR:
Mounting Bolts 37 - 56 Nm (27 - 41 ft. lbs.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.