Section 15 (Engine Controls - Specifications): Capacities

1995 Mazda B4000 SE, 2D Pickup, StandardSECTION Capacities
WARNING: This page is about a different car, the 1995 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
BATTERY SPECIFICATIONS

Application Amp Hr. Rating
Standard 40
Heavy-Duty 52
FLUID CAPACITIES

Application Quantity
Crankcase (Includes Filter) 5.1 Qts. (4.8L)
Cooling System (Includes Heater) 10.3 Qts. (9.7L)
Automatic Transmission (2) 9.1 Qts. (8.6L)
Front Differential (3) 1.8 Qts. (1.7L)
Rear Differential (3) 1.6 Qts. (1.5L)
Transfer Case (1) 1.6 Qts. (1.5L)
(1) Use SAE 75W-90 for all-season conditions, and SAE 80W-90 for temperatures greater than 50°F (10°C).
(2) Use ATF M-III or Dexron-II.
(3) Use SAE 90 for temperatures greater than 0°F (-18°C), and SAE 80W for temperatures less than 0°F (-18°C).
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.