Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA1995B4000 SE, 2D PICKUP, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMESEATS - POWERCOMPONENT TESTINGCONTROL SWITCH
1995 Mazda B4000 SE, 2D Pickup, Standard
Control Switch
1995 Mazda B4000 SE, 2D Pickup, StandardSECTION Control Switch
Using ohmmeter, check continuity between indicated switch connector terminals when switch is activated as specified. See POWER SEAT SWITCH CONTINUITY . SeeFig 1 . Replace switch if it does not test as specified.
POWER SEAT SWITCH CONTINUITY
| Switch Position | Continuity Between Terminals No. | ||
|---|---|---|---|
| Neutral (1) | 1, 3, 4, 5, 6, 7 & 8 | ||
| Front Up | 1 & 2; 3, 4, 5, 6, 7 & 8 | ||
| Front Down | 2 & 7; 1, 3, 4, 5, 6 & 8 | ||
| Upward | 1, 2 & 3; 4, 5, 6, 7 & 8 | ||
| Downward | 2, 7 & 8; 1, 3, 4, 5 & 6 | ||
| Forward | 2 & 6; 1, 3, 4, 5, 7 & 8 | ||
| Rearward | 2 & 5; 1, 3, 4, 6, 7 & 8 | ||
| Rear Up | 2 & 3; 1, 4, 5, 6, 7 & 8 | ||
| Rear Down | 2 & 8; 1, 3, 4, 5, 6 & 7 | ||
|
|||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.