Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA1995B4000 2WD V6-4.0L OHVREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINESYSTEM SPECIFICATIONSENGINE COMPONENT SPECIFICATIONSCONNECTING ROD BEARINGS
1995 Mazda B4000 2WD V6-4.0L OHV
Connecting Rod Bearings
1995 Mazda B4000 2WD V6-4.0L OHVSECTION Connecting Rod Bearings
Connecting Rod Bearings Clearance to Crankshaft:
Desired 0.0003 - 0.0024
Allowable 0.0005 - 0.0022
Bearing Wall Thickness:
Standard 0.0551 - 0.0554
Yellow (a) 0.0555 - 0.0558
(a) 0.002 Undersize = add 0.001 to standard thickness.
Desired 0.0003 - 0.0024
Allowable 0.0005 - 0.0022
Bearing Wall Thickness:
Standard 0.0551 - 0.0554
Yellow (a) 0.0555 - 0.0558
(a) 0.002 Undersize = add 0.001 to standard thickness.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.