Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Limit Switch
Manually move sun roof panel. See DESCRIPTION & OPERATION . With sun roof panel in specified position, check continuity between specified terminals of sun roof motor connector. See LIMIT SWITCH CONTINUITY TEST . SeeFig 1 . If continuity is not as specified, replace sun roof motor.
| Sun Roof Position | Terminals (1) | Continuity | |||
|---|---|---|---|---|---|
| MX-6 | |||||
| Opened | A & G | No | |||
| Closed | A & G | Yes | |||
| Tilted Up | A & G | No | |||
| 626 | |||||
| Opened | D & F | Yes | |||
| Closed | D & E; C & H | Yes | |||
| Tilted Up | C & G | Yes | |||
|
|||||
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.