Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA1995626 L4-1991CC 2.0L DOHCREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSTESTING AND INSPECTIONREADING AND CLEARING DIAGNOSTIC TROUBLE CODESCLEARING DIAGNOSTIC TROUBLE CODESWITH AUTOMATIC TRANSAXLE (ATX)WITH SUPER STAR II SCAN TOOL
1995 Mazda 626 L4-1991cc 2.0L DOHC
With Super Star II Scan Tool
1995 Mazda 626 L4-1991cc 2.0L DOHCSECTION With Super Star II Scan Tool
After-Repair Procedure
1. Run the key On Engine Off Self-Test.
2. When the DTC'S begin to be displayed.
Deactive Self-Test:
-SUPER STAR II: Unlatching the center button (up position)
3. Continuous Memory will be erased in the PCM.
Note: Do not disconnect battery to clear Continuous Memory. This will erase the Keep Alive Memory (KAM) information which may cause a driveability concern.
1. Run the key On Engine Off Self-Test.
2. When the DTC'S begin to be displayed.
Deactive Self-Test:
-SUPER STAR II: Unlatching the center button (up position)
3. Continuous Memory will be erased in the PCM.
Note: Do not disconnect battery to clear Continuous Memory. This will erase the Keep Alive Memory (KAM) information which may cause a driveability concern.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.