Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA1995626 L4-1991CC 2.0L DOHCREPAIR AND DIAGNOSISBODY AND FRAMELOCKSKEYLESS ENTRYKEYLESS ENTRY TRANSMITTERKEYLESS ENTRY TRANSMITTER BATTERYSERVICE AND REPAIR
1995 Mazda 626 L4-1991cc 2.0L DOHC
Keyless Entry Transmitter Battery: Service and Repair
1995 Mazda 626 L4-1991cc 2.0L DOHCSECTION Service and Repair
Replacing the Transmitter Battery
1. Snap apart the transmitter with a thin coin or other suitable tool.
2. Install the new batteries with the 0 side facing up.
Battery specification: Lithium CR2016 x 2 or the equivalent
3. Snap the transmitter together.
Note: The batteries will last about 2 years when used an average of 10 times per day.
1. Snap apart the transmitter with a thin coin or other suitable tool.
2. Install the new batteries with the 0 side facing up.
Battery specification: Lithium CR2016 x 2 or the equivalent
3. Snap the transmitter together.
Note: The batteries will last about 2 years when used an average of 10 times per day.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.