Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Electronic Fuel Injection Control Unit
The Electronic Control Unit/Assembly (ECU/ECA), through various input sensors, monitors battery voltage, engine RPM, intake air volume, cranking signal, crankshaft angle, intake air temperature, radiator and engine coolant temperatures, exhaust oxygen content, throttle position, atmospheric pressure, gearshift lever position, clutch engagement, braking, power steering operation, and A/C compressor operation.
The ECU/ECA uses this input information in controlling fuel injection and the actuating of other output devices. On Miata, MX-6 turbo, 626 turbo and all 929 models, spark timing is controlled by the ECU.
The ECU/ECA has a built-in, fail-safe mechanism. If a fault occurs while driving, the ECU/ECA will substitute pre-programmed values. Driving performance will be affected, but vehicle may still be driven.
The ECU/ECA has a self-diagnostic function which allows the unit to store a number of trouble codes in its memory. A Malfunction Indicator Lamp (MIL) informs the driver of system problems. The MIL is in the center of the instrument cluster, under the engine symbol marked CHECK.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.