Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
1988 Mazda B2200 SE-5, 2D Pickup, Automatic
Quick Lookups: Fluids
1988 Mazda B2200 SE-5, 2D Pickup, AutomaticSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Refrigerant | 1.75 LBS. | 0.79 KG | R-12 | S | |||
| Automatic Transmission Fluid | 2.2L Eng | 7.90 QTS. | 7.47 L | S | |||
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | S | |||
| Differential Gear Oil | 2.2L Eng | 1.30 QTS. | 1.23 L | S | |||
| Engine Coolant | 2.2L Eng | 7.90 QTS. | 7.47 L | With Heater 7.9 qts. - Without Heater 7.3 qts. | S | ||
| Engine Oil | 2.2L Eng | 4.42 QTS. | 4.18 L | SAE 5W-30 (Below -20Deg.F to 35Deg.F) 30 (35Deg.F to Above 90Deg.F) 40 (Below 90Deg.F to Above 120Deg.F) 10W-30 (Below -10Deg.F to Above 85Deg.F) 10W-40, 10W-50 (Below -10Deg.F to Above 120Deg.F) 20W-40, 20W-50 (Below 10Deg.F to Above 120Deg.F) | S | ||
| Engine Oil | 2.2L Eng | w/o Filter | 4.10 QTS. | 3.88 L | SAE 5W-30 (Below -20Deg.F to 35Deg.F) 30 (35Deg.F to Above 90Deg.F) 40 (Below 90Deg.F to Above 120Deg.F) 10W-30 (Below -10Deg.F to Above 85Deg.F) 10W-40, 10W-50 (Below -10Deg.F to Above 120Deg.F) 20W-40, 20W-50 (Below 10Deg.F to Above 120Deg.F) | S | |
| Fuel Tank | 2.2L Eng | 14.80 GALS. | 56.02 L | Long Bed - 17.4 gals., Short Bed or Cab Plus - 14.8 gals. | S | ||
| Manual Transmission Fluid | 2.2L Eng | 2.10 QTS. | 1.98 L | S | |||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.