Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Intake Air Temperature Sensor
Remove air cleaner cover. Heat intake air temperature sensor and note temperature. Using an ohmmeter, check resistance between intake air temperature sensor Black/Lt. Green and Yellow/White terminals. Check resistance using INTAKE AIR TEMPERATURE SENSOR RESISTANCE table.
| Temperature °F (°C) | Ohms |
|---|---|
| -4 (-20) | 14,600-17,800 |
| 68 (20) | 2200-2700 |
| 176 (80) | 290-350 |
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.