Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSLINCOLN2016MKZ BASE, 2.0L ENG VIN 9, AWDREPAIR AND DIAGNOSISSTEERINGSTEERING COLUMN (EXCEPT HYBRID)REMOVAL AND INSTALLATIONSTEERING COLUMNINSTALLATION

2016 Lincoln MKZ Base, 2.0L Eng VIN 9, AWD

Steering Column: Installation

2016 Lincoln MKZ Base, 2.0L Eng VIN 9, AWDSECTION Installation

1.

NOTE: Transfer parts as needed.

To install, reverse the removal procedure.

2.

If equipped with memory steering column, use the steering column control switch and set the tilt motor soft stops as follows.
1. 1.
  
  Move the column upward until it reaches the end of travel.
1. 2.
  
  Move the column in the same direction until it reaches the end of travel again.
1. 3.
  
  Move the column downward until it reaches the end of travel.
1. 4.
  
  Move the column in the same direction until it reaches the end of travel again.

Courtesy of FORD MOTOR COMPANY

3.

If equipped with memory steering column, use the steering column control switch and set the tilt motor soft stops as follows.
1. 1.
  
  Move the column rearward until it reaches the end of travel.
1. 2.
  
  Move the column in the same direction until it reaches the end of travel again.
1. 3.
  
  Move the column forward until it reaches the end of travel.
1. 4.
  
  Move the column in the same direction until it reaches the end of travel again.

Courtesy of FORD MOTOR COMPANY

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.