Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLINCOLN2016MKZ BASE, 2.0L ENG VIN 9, AWDREPAIR AND DIAGNOSISSTEERINGSTEERING COLUMN (EXCEPT HYBRID)DESCRIPTION AND OPERATIONSTEERING COLUMN - SYSTEM OPERATION AND COMPONENT DESCRIPTIONSYSTEM OPERATIONNETWORK MESSAGE CHART
2016 Lincoln MKZ Base, 2.0L Eng VIN 9, AWD
Network Message Chart
2016 Lincoln MKZ Base, 2.0L Eng VIN 9, AWDSECTION Network Message Chart
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Driver door ajar status | BCM | Message to communicate the status of the driver door. The message is transmitted from the BCM to the GWM. |
| Personality recall | BCM | When the personality recall command is received from the BCM, the DSM stores or recalls the steering wheel position. If a RKE transmitter has been programmed to a memory position, this input is used to recall the steering column position. |
| Steering column position switch status | SCCM | Message to control the adjustable steering column when the steering column control switch is pressed. The message is transmitted from the SCCM to the GWM. |
| Steering column position switch status | GWM | Message to control the adjustable steering column when the steering column control switch is pressed. The message is transmitted from the GWM to the DSM. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.