Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLINCOLN2011MKZ AWD V6-3.5LREPAIR AND DIAGNOSISTECHNICAL SERVICE BULLETINSCUSTOMER INTERESTSYNC SYSTEM(R) - VARIOUS FUNCTIONALITY CONDITIONS
2011 Lincoln MKZ AWD V6-3.5L
SYNC System(R) - Various Functionality Conditions
2011 Lincoln MKZ AWD V6-3.5LSECTION SYNC System(R) - Various Functionality Conditions
TSB 12-8-19
08/29/12
SYNC - VARIOUS FUNCTIONALITY CONCERNS - BUILT ON OR BEFORE 7/1/2012
FORD:
2011 Focus
2011-2012 Fiesta, Fusion, Mustang, Taurus,
E-Series, Escape, Expedition, F-150,
F-Super Duty, Flex
LINCOLN:
2011-2012 MKS, MKZ, MKT, Navigator
MERCURY:
2011 Milan, Mariner
The article supersedes TSB 12-7-6 to add a production fix date.
ISSUE
Some 2011-2012 vehicles equipped with SYNC(R) and built on or before 7/1/2012 may exhibit intermittent voice recognition: SYNC(R) is not listening/hearing commands, no response to voice commands or SYNC responds voice commands not available with this device when using play artist/album/track commands. Voice recognition, phone/USB connectivity, and traffic, directions and information notification/voice recognition, commands not available with this device when using play artist/album/track commands.
ACTION
Follow the Service Procedure steps to improve the condition.
SERVICE PROCEDURE
1. This procedure excludes vehicles equipped with MyFord Touch or MyLincoln Touch. All other vehicles proceed to Step 2.
2. Verify if a SYNC update is available. Go to the Professional Technician Society (PTS) website and from the OASIS tab select the SYNC button. Scroll to the bottom of the page, under software update actions click on the (View Latest Software) hyperlink located next to the standard selection.
a. If no software updates are shown available this article does not apply. Refer to Workshop Manual (WSM), Section 415-00 for normal diagnosis.
b. If sofiware updates are available ensure that the Integrated Diagnostic Software (IDS) release is at 79.02 or higher, then close the IDS software and proceeded to Step 3.
3. Reprogram the Accessory Protocol Interface Module (APIM). To perform the reprogram it will be necessary to follow the online version of the WSM, Section 418-01 Accessory Protocol Interface Module APIM - Standard programming.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.
OPERATION DESCRIPTION TIME
120819A Reprogram The APIM (Do 0.4 Hr.
Not Use With Any Other
Labor Operations)
DEALER CODING
CONDITION
BASIC PART NO. CODE
14D212 04
Disclaimer
08/29/12
SYNC - VARIOUS FUNCTIONALITY CONCERNS - BUILT ON OR BEFORE 7/1/2012
FORD:
2011 Focus
2011-2012 Fiesta, Fusion, Mustang, Taurus,
E-Series, Escape, Expedition, F-150,
F-Super Duty, Flex
LINCOLN:
2011-2012 MKS, MKZ, MKT, Navigator
MERCURY:
2011 Milan, Mariner
The article supersedes TSB 12-7-6 to add a production fix date.
ISSUE
Some 2011-2012 vehicles equipped with SYNC(R) and built on or before 7/1/2012 may exhibit intermittent voice recognition: SYNC(R) is not listening/hearing commands, no response to voice commands or SYNC responds voice commands not available with this device when using play artist/album/track commands. Voice recognition, phone/USB connectivity, and traffic, directions and information notification/voice recognition, commands not available with this device when using play artist/album/track commands.
ACTION
Follow the Service Procedure steps to improve the condition.
SERVICE PROCEDURE
1. This procedure excludes vehicles equipped with MyFord Touch or MyLincoln Touch. All other vehicles proceed to Step 2.
2. Verify if a SYNC update is available. Go to the Professional Technician Society (PTS) website and from the OASIS tab select the SYNC button. Scroll to the bottom of the page, under software update actions click on the (View Latest Software) hyperlink located next to the standard selection.
a. If no software updates are shown available this article does not apply. Refer to Workshop Manual (WSM), Section 415-00 for normal diagnosis.
b. If sofiware updates are available ensure that the Integrated Diagnostic Software (IDS) release is at 79.02 or higher, then close the IDS software and proceeded to Step 3.
3. Reprogram the Accessory Protocol Interface Module (APIM). To perform the reprogram it will be necessary to follow the online version of the WSM, Section 418-01 Accessory Protocol Interface Module APIM - Standard programming.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.
OPERATION DESCRIPTION TIME
120819A Reprogram The APIM (Do 0.4 Hr.
Not Use With Any Other
Labor Operations)
DEALER CODING
CONDITION
BASIC PART NO. CODE
14D212 04
Disclaimer
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.