Module Communications Network DTCS

2009 Lincoln Town Car Signature Limited, 4.6 VSECTION Module Communications Network DTCS
COMMUNICATION NETWORK DIAGNOSTIC TROUBLE CODE (DTC) LIST

DTC Description Source Perform Test
U0002 High Speed CAN Communication Bus Performance Instrument cluster (IC) For the module that failed the network test, go to Symptom Chart.
U0073 Control Module Communication Bus A Off ABS module The module could not communicate on the network at a point in time. The fault is currently not present. CLEAR the DTC. REPEAT the network test with the scan tool.
U0073 Control Module Communication Bus A Off Vehicle dynamics module (VDM) The module could not communicate on the network at a point in time. The fault is currently not present. CLEAR the DTC. REPEAT the network test with the scan tool.
U0100 Lost Communication With ECM/PCM VDM The fault is currently not present. CLEAR the DTC. REPEAT the network test with the scan tool.
U0140 Lost Communication With Body Control Module (GEM) VDM For the module that failed the network test, go to Symptom Chart.
U0155 Lost Communication With Instrument Panel Cluster (IC) Control Module VDM For the module that failed the network test, go to Symptom Chart.
U0184 Lost Communication With Radio (ACM) Rear audio and temperature control (RATC) module REFER to INFORMATION AND ENTERTAINMENT SYSTEMS article.
U1040 SCP (J1850) Invalid or Missing Data for Vehicle Speed HVAC module RETRIEVE and FOLLOW non-network DTCs in the PCM.
U1041 SCP (J1850) Invalid or Missing Data for Vehicle Speed Driver door module (DDM) RETRIEVE and FOLLOW non-network DTCs in the PCM.
U1041 SCP (J1850) Invalid or Missing Data for Vehicle Speed Lighting control module (LCM) RETRIEVE and FOLLOW non-network DTCs in the PCM.
U1059 SCP (J1850) Invalid or Missing Data for Transmission / Transaxle / PRNDL DDM RETRIEVE and FOLLOW non-network DTCs in the PCM.
U1059 SCP (J1850) Invalid or Missing Data for Transmission / Transaxle / PRNDL LCM RETRIEVE and FOLLOW non-network DTCs in the PCM.
U1073 SCP (J1850) Invalid or Missing Data for Engine Coolant HVAC module RETRIEVE and FOLLOW non-network DTCs in the PCM.
U1112 SCP (J1850) Invalid or Missing Data for Primary Id $70 [Lighting control module, LCM] HVAC module RETRIEVE and FOLLOW non-network DTCs in the LCM.
U1135 SCP (J1850) Invalid or Missing Data for Ignition Switch / Starter DDM RETRIEVE and FOLLOW non-network DTCs in the LCM.
U1178 SCP (J1850) Invalid or Missing Data for Climate Control (HVAC) RATC module RETRIEVE and FOLLOW non-network DTCs in the LCM.
U1197 SCP (J1850) Invalid or Missing Data for Door Locks LCM RETRIEVE and FOLLOW non-network DTCs in the DDM.
U1199 SCP (J1850) Invalid or Missing Data for External Access (Doors) LCM RETRIEVE and FOLLOW non-network DTCs in the DDM.
U1262 SCP (J1850) Communication Bus Fault IC For the module that failed the network test, go to Symptom Chart.
U1900 CAN Communication Bus Fault - Receive Error ABS module For the module that failed the network test, go to Symptom Chart.
U1900 CAN Communication Bus Fault - Receive Error IC For the module that failed the network test, go to Symptom Chart.
U2011 Module Transmitted Invalid Data (Non SCP) VDM RETRIEVE and FOLLOW non-network DTCs in the DDM.
U2013 Compass Module Is Not Responding IC REFER to INSTRUMENTATION, MESSAGE CENTER, AND WARNING CHIMES article.
U2023 Fault Received From External Node ABS module RETRIEVE and FOLLOW non-network DTCs from other modules.
U2023 Fault Received From External Node IC RETRIEVE and FOLLOW non-network DTCs from other modules.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.