Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLINCOLN2009NAVIGATOR L RWDREPAIR AND DIAGNOSISBODY & FRAMESEATSSEAT SYSTEM - SEATINGREMOVAL AND INSTALLATIONSEAT - EXPLODED VIEW, THIRD ROWSEAT BACKREST - 60 PERCENT
2009 Lincoln Navigator L RWD
Seat Backrest - 60 Percent
2009 Lincoln Navigator L RWDSECTION Seat Backrest - 60 Percent
ITEM DESCRIPTION CHART
| Item | Part Number | Description |
|---|---|---|
| 1 | 611A08 | Head restraint assembly |
| 2 | 610A16 | Head restraint guide (2 required) |
| 3 | - | Backrest support panel |
| 4 | W505274 | Backrest support panel-to-backrest frame screw (15 required) |
| 5 | 666C02 | Manual latch handle |
| 6 | W505274 | Manual latch handle-to-backrest support panel screws (2 required) |
| 7 | - | Backrest release cable |
| 8 | 613A39 | Backrest frame |
| 9 | 666C04 | Safety belt guide cover |
| 10 | 613C46 | Safety belt retractor cover |
| 11 | W505274 | Safety belt retractor cover screws (4 required) |
| 12 | 611B64 | Safety belt retractor |
| 13 | W505274 | Safety belt retractor bolt (part of 611B64) |
| 14 | 611A70 | Cover, safety belt webbing |
| 15 | 624C32 | Inboard slide bracket cover |
| 16 | W708686 | Inboard slide bracket cover-to-inboard slide bracket screw |
| 17 | 613F18 | Inboard slide bracket-to-backrest frame nut |
| 18 | 613F18 | Inboard slide bracket-to-cushion frame nut |
| 19 | 613F18 | Inboard slide bracket-to-inboard latch nut |
| 20 | 624C30 | Inboard slide bracket |
| 21 | 624C33 | Outboard slide bracket cover |
| 22 | W708686 | Outboard slide bracket cover-to-outboard slide bracket screw |
| 23 | 624C30 | Outboard slide bracket |
| 24 | 613F18 | Outboard slide bracket-to-backrest frame nut |
| 25 | 613F18 | Outboard slide bracket-to-cushion frame nut |
| 26 | 613F18 | Outboard slide bracket-to-outboard latch nut |
| 27 | - | Safety belt anchor bolt (part of 611B64) |
| 28 | 66601/66801 | Backrest trim cover/foam pad |
| 29 | 613F18 | Inboard latch-to-backrest frame bolt (2 required) |
| 30 | 63161 | Cushion frame |
| 31 | - | Child safety seat tether anchor (part of 613A39) |
| 32 | - | Child safety seat tether anchor bolt (part of 613A39) |
| 33 | - | Support bracket |
| 34 | - | Bolt, support bracket |
| 35 | N620480 | Nut, support bracket |
| 36 | 613F18 | Outboard latch-to-cushion frame bolt |
| 37 | 613D61 | Outboard latch |
| 38 | 600M47 | Inboard manual latch |
| 39 | 600M46 | Inboard power latch |
| 40 | 14547 | Power-fold seat motor and bracket |
| 41 | - | Bolt, bracket-to-pivot (part of 14547) |
| 42 | - | Bushing, power-fold seat motor (part of 14547) |
| 43 | - | Bolt, bracket-to-latch (part of 14547) |
| 44 | - | Torque shaft, power-fold seat motor (part of 14547) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.