Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLINCOLN2009NAVIGATOR L RWDREPAIR AND DIAGNOSISBODY & FRAMESEATSSEAT SYSTEM - SEATINGDISASSEMBLY AND ASSEMBLYSEAT BACKREST - THIRD ROW, 40 PERCENTDISASSEMBLY AND ASSEMBLY
2009 Lincoln Navigator L RWD
Disassembly and Assembly
2009 Lincoln Navigator L RWDSECTION Disassembly and Assembly
NOTE:
For parts identification and locations, refer to SEAT - EXPLODED VIEW, THIRD ROW .
- Remove the seat backrest cover. For additional information, refer to SEAT BACKREST COVER - THIRD ROW .
- Remove the bolt and the safety belt buckle.
- For installation, align the anti-rotation tab.
- To install, tighten to 40 Nm (30 lb-ft).
- Remove the nut, screw and support bracket.
- Remove the 2 inboard latch-to-backrest frame bolts and the inboard latch.
- To install, tighten to 40 Nm (30 lb-ft).
- Remove the outboard latch-to-cushion frame bolt and the outboard latch.
- To install, tighten to 30 Nm (22 lb-ft).
- Remove the 6 screws and the backrest support panel.
- To assemble, reverse the disassembly procedure.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.