SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLINCOLN2008NAVIGATOR RWDREPAIR AND DIAGNOSISBRAKESTRACTION CONTROLBRAKE SYSTEM - GENERAL INFORMATIONDIAGNOSTIC TESTSBRAKE SYSTEMSYMPTOM CHART - ADJUSTABLE PEDALS WITH MEMORY FEATURE
2008 Lincoln Navigator RWD

Symptom Chart - Adjustable Pedals With Memory Feature

2008 Lincoln Navigator RWDSECTION Symptom Chart - Adjustable Pedals With Memory Feature
Symptom Chart - Adjustable Pedals With Memory Feature

Condition Possible Sources Action
  • No communication with the driver seat module (DSM)
  • Fuse
  • Wiring, terminals or connectors
  • DSM
  • Adjustable brake pedal does not operate correctly - using the adjustable pedal switch
  • Fuse
  • Wiring, terminals or connectors
  • Adjustable pedal switch
  • Adjustable pedal motor
  • DSM
  • Adjustable brake pedal does not operate correctly - using the memory SET switch
  • Fuse
  • Wiring, terminals or connectors
  • Memory SET switch
  • Adjustable pedal motor
  • DSM
  • If the seats and mirrors are also inoperative using the memory SET switch, REFER to SEATING article to diagnose the memory seats and REAR VIEW MIRRORS article to diagnose the memory mirrors.
  • If only the adjustable pedals are inoperative using the memory SET switch, go to Pinpoint Test C .
  • Adjustable brake pedal does not operate correctly - using the remote transmitter
  • Fuse
  • Wiring, terminals or connectors
  • Remote transmitter
  • Adjustable pedal motor
  • DSM
  • VERIFY the remote keyless entry (RKE) transmitter is operating correctly and is associated to a memory position. REFER to Memory Position Programming in SEATING article or the Owner's Literature for information on associating a RKE transmitter. For a RKE transmitter function concern, REFER to HANDLES, LOCKS, LATCHES AND ENTRY SYSTEMS article. CARRY OUT the DSM self-test and REFER to the Driver Seat Module (DSM) DTC Chart to diagnose any DTCs retrieved. If no DTCs are retrieved, go to Pinpoint Test C .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.