Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Glass, Frames and Mechanisms - Front Door
2005 Lincoln LS 3.0 SSECTION Glass, Frames and Mechanisms - Front Door
WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Glass, Frames and Mechanisms Components - Exploded View, Front Door With Torque Specifications
| Item | Part Number | Description |
|---|---|---|
| 1 | W506943 | Exterior door glass weatherstrip screw |
| 2 | 21116 | Exterior door glass weatherstrip |
| 3 | 22290 | Interior door glass weatherstrip |
| 4 | 21410 | Front door window glass |
| 5 | W500213 | Front door glass top run bolts (2 required) |
| 6 | 21548 | Front door glass top run |
| 7 | W707195 | Front door glass screws (2 required) |
| 8 | W701753 | Window regulator and motor bolt |
| 9 | - | Window regulator and motor bolts (2 required) |
| 10 | W520111 | Window regulator and motor nuts (2 required) |
| 11 | 23200 | Window regulator and motor |
| 12 | N805651 | Bracket bolt |
| 13 | 226A20 | Bracket |
| 14 | W703613 | Pushpins (3 required) |
| 15 | 211B16 | Pad (Bolster) assembly |
- For additional information, refer to the procedures in this article.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.