Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLINCOLN2005LS 3.0 SREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 890 (EXHAUST SYSTEM)SPECIFICATIONSTORQUE SPECIFICATIONS
2005 Lincoln LS 3.0 S
Torque Specifications
2005 Lincoln LS 3.0 SSECTION Torque Specifications
WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| A/C compressor bolts | 25 | 18 | - |
| A/C compressor nut | 25 | 18 | - |
| Catalytic converter bracket bolts | 25 | 18 | - |
| Catalyst monitor sensor | 47 | 35 | - |
| Exhaust catalytic converter nuts | 47 | 35 | - |
| Exhaust gas recirculation (EGR) tube nut | 40 | 30 | - |
| Exhaust manifold nuts (2.3L and Hybrid) | 47 | 35 | - |
| Exhaust manifold nuts (3.0L) | 25 | 18 | - |
| Exhaust flexible pipe nuts | 25 | 18 | - |
| Exhaust Y-pipe nuts (3.0L) | 47 | 35 | - |
| Heated oxygen sensor (HO2S) | 47 | 35 | - |
| Heat shield bolts | 10 | - | 89 |
| Heat shield clamps | 7 | - | 62 |
| Resonator nuts | 47 | 35 | - |
| U-bolt clamp assembly nuts | 47 | 35 | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.