Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSLINCOLN2005LS 3.0 SREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1422 (REAR DISC BRAKE SYSTEM)SPECIFICATIONSGENERAL SPECIFICATIONS

2005 Lincoln LS 3.0 S

General Specifications

2005 Lincoln LS 3.0 SSECTION General Specifications

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.

GENERAL SPECIFICATIONS

Item	Specification
Brake Discs
Brake disc minimum thickness	18.0 mm (0.708 in)
Brake disc minimum thickness (Limo)	12.0 mm (0.472 in)
Brake Pads
Brake pad maximum taper wear (in any direction)	3.0 mm (0.118 in)
Brake pad minimum thickness	3.0 mm (0.118 in)

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.