Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLEXUS2012RX 450H AWD V6-3.5L (2GR-FXE) HYBRIDREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECONNECTING ROD, ENGINE
2012 Lexus RX 450h AWD V6-3.5L (2GR-FXE) Hybrid
Connecting Rod, Engine
2012 Lexus RX 450h AWD V6-3.5L (2GR-FXE) HybridSECTION Connecting Rod, Engine
Connecting Rod Bolt Torque
1st 25 Nm (255 kgf-cm, 18 ft-lbf)
2nd Tighten 90°
Connecting Rods
Standard thrust clearance 0.15 to 0.40 mm (0.00591 to 0.0157 in.)
Maximum thrust clearance 0.50 mm (0.0197 in.)
Standard oil clearance 0.045 to 0.067 mm (0.00177 to 0.00264 in.)
Maximum oil clearance 0.070 mm (0.00276 in.)
Connecting Rod Diameter
Connecting Rod Bearing Center Wall Thickness
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.