SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLEXUS2012RX 450H AWD V6-3.5L (2GR-FXE) HYBRIDREPAIR AND DIAGNOSISCRUISE CONTROLDISTANCE SENSORSERVICE AND REPAIRINSTALLATION
2012 Lexus RX 450h AWD V6-3.5L (2GR-FXE) Hybrid

Installation

2012 Lexus RX 450h AWD V6-3.5L (2GR-FXE) HybridSECTION Installation




CRUISE CONTROL: MILLIMETER WAVE RADAR SENSOR: INSTALLATION

1. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY

(a) Tighten the 3 bolts on the millimeter wave radar sensor assembly.





Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

HINT
Tighten the bolts in the order indicated in the illustration.

(b) Connect the connector.

2. INSTALL FRONT BUMPER ASSEMBLY Installation

3. INSTALL HOOD CENTER CUSHION Installation

4. ADD WASHER FLUID (w/ Headlight Cleaner System) Installation

5. PREPARE VEHICLE FOR FOG LIGHT AIMING ADJUSTMENT Adjustments

6. PREPARE FOR FOG LIGHT AIMING Adjustments

7. INSPECT FOG LIGHT AIMING Adjustments

8. ADJUST FOG LIGHT AIMING Adjustments

9. ADJUST MILLIMETER WAVE RADAR SENSOR Adjustments

10. INSTALL COOL AIR INTAKE DUCT SEAL Installation

11. INSTALL ENGINE ROOM SIDE COVER Installation

12. INSTALL ENGINE ROOM SIDE COVER LH Installation
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.