SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLEXUS2012IS 250C V6-2.5L (4GR-FSE)REPAIR AND DIAGNOSISRELAYS AND MODULESRELAYS AND MODULES - ACCESSORIES AND OPTIONAL EQUIPMENTCENTRAL CONTROL MODULESERVICE AND REPAIRMULTI-MEDIA INTERFACE ECUREMOVAL
2012 Lexus IS 250C V6-2.5L (4GR-FSE)

Removal

2012 Lexus IS 250C V6-2.5L (4GR-FSE)SECTION Removal




AUDIO / VIDEO: MULTI-MEDIA INTERFACE ECU: REMOVAL

1. REMOVE DOOR SCUFF PLATE ASSEMBLY

HINT
Use the same procedure for the RH side and LH side Removal.

2. REMOVE FRONT DOOR OPENING TRIM COVER

HINT
Use the same procedure for the RH side and LH side Removal.

3. REMOVE INSTRUMENT SIDE PANEL Removal

4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

5. REMOVE MULTI-MEDIA INTERFACE ECU WITH BRACKET

(a) Disconnect each connector.

(b) Remove the 2 screws and multi-media interface ECU with bracket.





6. REMOVE NO. 1 MULTI-MEDIA INTERFACE BRACKET

(a) Remove the 2 screws and No. 1 multi-media interface bracket.





7. REMOVE NO. 2 MULTI-MEDIA INTERFACE BRACKET

(a) Remove the 2 screws and No. 2 multi-media interface bracket.





8. REMOVE MULTI-MEDIA INTERFACE ECU
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.