Quick Lookups: Fluids

2010 Lexus RX 450h 3.5 BSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 4.60 OZS. 0.13 L POE ND-OIL 11 S
Air Cond Refrigerant 1.00 LBS. 0.45 KG R-134a S
Automatic Transmission Fluid Front 4.90 QTS. 4.63 L TOYOTA Genuine Automatic Transmission Fluid Type WS Using ATF other than "TOYOTA Genuine ATF WS" may ultimately damage the transmission of the vehicle. S
Brake Fluid N/A N/A DOT 3 Brake Fluid S
Engine Coolant Gasoline engines,w/o Towing Package 10.00 QTS. 9.46 L TOYOTA Super Long Life Coolant or equivalent DO NOT use plain water alone. S
Engine Coolant Gasoline engines,w/Towing Package 12.30 QTS. 11.64 L TOYOTA Super Long Life Coolant or Similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology DO NOT use plain water alone. S
Engine Coolant Power Control Unit 2.00 QTS. 1.89 L TOYOTA Super Long Life Coolant or Similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology DO NOT use plain water alone. S
Engine Oil Drain and Refill,w/Filter 6.40 QTS. 6.05 L API - SAE 0W-20 If SAE 0W-20 is not available, SAE 5W-20 may be used. However, it must be replaced with SAE 0W-20 at the next oil change. S
Engine Oil Drain and Refill,w/o Filter 6.00 QTS. 5.67 L API - SAE 0W-20 If SAE 0W-20 is not available, SAE 5W-20 may be used. However, it must be replaced with SAE 0W-20 at the next oil change. S
Fuel Tank 17.10 GALS. 64.73 L S
Windshield Washer Fluid N/A N/A Washer Fluid Refer to the freezing temperatures listed on the washer fluid tank. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.