2008 Lexus IS 350FACTORY OEM SERVICE PROCEDURE

Problem Symptoms Table

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

HINT.

  • Use the table below to help determine the cause of problem symptoms If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table Check each symptom by checking the suspected areas in the order they are listed Replace parts as necessary.
  • Inspect the fuses and relays related to this system before inspecting the suspected areas below

Audio Function 

PROBLEM SYMPTOMS CHART (AUDIO FUNCTION)

Symptom Suspected Area See
Pressing power switch does not turn on system (w/o navigation system) Proceed to "Pressing Power Switch does not Turn on System" PRESSING POWER SWITCH DOES NOT TURN ON SYSTEM 
Radio receiver power source circuit RADIO RECEIVER POWER SOURCE CIRCUIT 
Integration control & panel assembly power source circuit INTEGRATION CONTROL AND PANEL ASSEMBLY POWER SOURCE CIRCUIT 
AVC-LAN circuit AVC-LAN CIRCUIT 
Radio receiver RADIO RECEIVER 
Integration control & panel assembly TERMINALS OF ECU
Pressing power switch does not turn on system (w/ navigation system) Proceed to "Pressing Power Switch does not Turn on System" PRESSING POWER SWITCH DOES NOT TURN ON SYSTEM 
Radio receiver power source circuit RADIO RECEIVER POWER SOURCE CIRCUIT 
Multi-display power source circuit MULTI-DISPLAY POWER SOURCE CIRCUIT
AVC-LAN circuit AVC-LAN CIRCUIT
Radio receiver RADIO RECEIVER 
Multi-display REMOVAL
Panel switch does not function Steering pad switch circuit STEERING PAD SWITCH CIRCUIT 
AVC-LAN circuit AVC-LAN CIRCUIT 
Radio receiver RADIO RECEIVER 
No sound can be heard from speakers (audio is mute) (w/o navigation system) AVC-LAN circuit AVC-LAN CIRCUIT 
Radio receiver power source circuit RADIO RECEIVER POWER SOURCE CIRCUIT 
Integration control & panel assembly power source circuit INTEGRATION CONTROL AND PANEL ASSEMBLY POWER SOURCE CIRCUIT 
Proceed to "No Sound can be Heard from Speakers" NO SOUND CAN BE HEARD FROM SPEAKERS 
Stereo component amplifier power source circuit STEREO COMPONENT AMPLIFIER POWER SOURCE CIRCUIT 
Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Component Amplifier" SOUND SIGNAL CIRCUIT BETWEEN RADIO RECEIVER AND STEREO COMPONENT AMPLIFIER 
Speaker circuit SPEAKER CIRCUIT 
Proceed to "Mute Signal Circuit between Radio Receiver and Stereo Component Amplifier" MUTE SIGNAL CIRCUIT BETWEEN RADIO RECEIVER AND STEREO COMPONENT AMPLIFIER 
Stereo component amplifier STEREO COMPONENT AMPLIFIER 
Radio receiver RADIO RECEIVER 
Integration control & panel assembly REMOVAL
No sound can be heard from speakers (audio is mute) (w/ navigation system) AVC-LAN circuit AVC-LAN CIRCUIT
Radio receiver power source circuit RADIO RECEIVER POWER SOURCE CIRCUIT 
Multi-display power source circuit MULTI-DISPLAY POWER SOURCE CIRCUIT
Proceed to "No Sound can be Heard from Speakers" NO SOUND CAN BE HEARD FROM SPEAKERS 
Stereo component amplifier power source circuit STEREO COMPONENT AMPLIFIER POWER SOURCE CIRCUIT 
Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Component Amplifier" SOUND SIGNAL CIRCUIT BETWEEN RADIO RECEIVER AND STEREO COMPONENT AMPLIFIER 
Speaker circuit SPEAKER CIRCUIT 
Proceed to "Mute Signal Circuit between Radio Receiver and Stereo Component Amplifier" MUTE SIGNAL CIRCUIT BETWEEN RADIO RECEIVER AND STEREO COMPONENT AMPLIFIER 
Stereo component amplifier STEREO COMPONENT AMPLIFIER 
Radio receiver RADIO RECEIVER 
Multi-display REMOVAL
Only DVD sound cannot be heard or sound quality is bad (w/DVD Player) Proceed to "DVD Sound Signal Circuit between Radio Receiver and Stereo Component Amplifier" DVD SOUND SIGNAL CIRCUIT BETWEEN RADIO RECEIVER AND STEREO COMPONENT AMPLIFIER 
Stereo component amplifier STEREO COMPONENT AMPLIFIER 
Radio receiver RADIO RECEIVER 
Sound quality is bad in all modes (volume is too low) Proceed to "Poor Sound Quality in All Modes (Low Volume)" POOR SOUND QUALITY IN ALL MODES (LOW VOLUME) 
Speaker circuit SPEAKER CIRCUIT 
Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Component Amplifier" SOUND SIGNAL CIRCUIT BETWEEN RADIO RECEIVER AND STEREO COMPONENT AMPLIFIER 
Proceed to "Mute Signal Circuit between Radio Receiver and Stereo Component Amplifier" MUTE SIGNAL CIRCUIT BETWEEN RADIO RECEIVER AND STEREO COMPONENT AMPLIFIER 
Stereo component amplifier STEREO COMPONENT AMPLIFIER 
Radio receiver RADIO RECEIVER 
ASL does not function Proceed to "Vehicle Speed Signal Circuit between Stereo Component Amplifier and Combination Meter" VEHICLE SPEED SIGNAL CIRCUIT BETWEEN STEREO COMPONENT AMPLIFIER AND COMBINATION METER 
External device sound cannot be heard or sound quality is bad (stereo jack is used) Radio receiver power source circuit RADIO RECEIVER POWER SOURCE CIRCUIT 
Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter" SOUND SIGNAL CIRCUIT BETWEEN RADIO RECEIVER AND STEREO JACK ADAPTER 
Stereo jack adapter STEREO JACK ADAPTER ASSEMBLY 
Radio receiver RADIO RECEIVER 
Abnormal noise occurs Proceed to "Noise Occurs" NOISE OCCURS 
Stereo component amplifier STEREO COMPONENT AMPLIFIER 
Radio receiver RADIO RECEIVER 
Radio broadcast cannot be received or poor reception Proceed to "Radio Broadcast cannot be Received or Poor Reception" RADIO BROADCAST CANNOT BE RECEIVED OR POOR RECEPTION 
CD cannot be inserted/played or CD is ejected right after insertion Radio receiver power source circuit RADIO RECEIVER POWER SOURCE CIRCUIT 
Proceed to "CD cannot be Inserted/Played or CD is Ejected Right After Insertion" CD CANNOT BE INSERTED / PLAYED OR CD IS EJECTED RIGHT AFTER INSERTION 
CD cannot be ejected Radio receiver power source circuit RADIO RECEIVER POWER SOURCE CIRCUIT 
Proceed to "CD cannot be Ejected" CD CANNOT BE EJECTED 
Sound quality is bad only when CD is played (volume is too low) Proceed to "Sound Quality is Bad Only when CD is Played (Volume is Too Low)" SOUND QUALITY IS BAD ONLY WHEN CD IS PLAYED (VOLUME IS TOO LOW) 
CD sound skips Proceed to "CD Sound Skips" CD SOUND SKIPS 
Radio receiver or integration control & panel assembly cannot be illuminated at night Illumination circuit ILLUMINATION CIRCUIT 

Steering Pad Switch Function 

PROBLEM SYMPTOMS CHART (STEERING PAD SWITCH FUNCTION)

Symptom Suspected Area See
Audio system cannot be operated with steering pad switch Steering pad switch circuit STEERING PAD SWITCH CIRCUIT 
Radio receiver RADIO RECEIVER 
Steering pad switch cannot be illuminated at night Illumination circuit ILLUMINATION CIRCUIT 
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.