2008 Lexus ES 350FACTORY OEM SERVICE PROCEDURE

DTC Check / Clear

  1. CHECK DTC 
    1. DTCs which are stored in the TCM can be displayed with Techstream.

      These scan tools can display pending DTCs and current DTCs. Some DTCs are not stored if the TCM doesn't detect a malfunction during consecutive driving. However, the malfunction detected while a driving is stored as a pending DTC.

      1. Connect Techstream to the Data Link Connector 3 (DLC3).
      2. Turn the engine switch on (IG).
      3. Enter the following menus: Powertrain / ECT / Trouble Codes.
      4. Confirm the DTCs and freeze frame data and then write them down.
      5. Confirm the details of the DTCs (See DIAGNOSTIC TROUBLE CODE CHART  ).
        NOTE: When a symptom has been duplicated using normal mode, use Techstream to check for DTCs. For DTCs that are subject to "2-trip detection logic", perform the following steps:
        Turn the engine switch off after the symptom has occurred once. Repeat the process of attempting to duplicate the symptom. When the problem or symptom happens for the second time and a DTC has been recorded, the MIL will illuminate, and the code will be stored.
  2. CLEAR DTC 
    1. Connect Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Enter the following menus: Powertrain / ECT / Trouble Codes / Clear.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.