Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Diagnostic Trouble Code Chart
If a DTC is displayed during the DTC check, check the parts listed in the table below and proceed to the page given.
| DTC Code | Detection Item | Trouble Area | MIL*1 | Memory*2 | Refer To |
|---|---|---|---|---|---|
| P0500 | Vehicle Speed Sensor "A" |
|
Comes on | DTC stored | |
| P0560 | System Voltage |
|
Comes on | DTC stored | |
| P0617 | Starter Relay Circuit High |
|
Comes on | DTC stored | |
| P0705 | Transmission Range Sensor Circuit Malfunction (PRNDL Input) |
|
Comes on | DTC stored | |
| P0710 | Transmission Fluid Temperature Sensor "A" Circuit |
|
Comes on | DTC stored | |
| P0711 | Transmission Fluid Temperature Sensor "A" Performance |
|
Comes on | DTC stored | |
| P0712 | Transmission Fluid Temperature Sensor "A" Circuit Low Input |
|
Comes on | DTC stored | |
| P0713 | Transmission Fluid Temperature Sensor "A" Circuit High Input |
|
Comes on | DTC stored | |
| P0715 | Input / Turbine Speed Sensor Circuit Malfunction |
|
Comes on | DTC stored | |
| P0717 | Input Speed Sensor Circuit No Signal |
|
Comes on | DTC stored | |
| P0724 | Brake Switch "B" Circuit High |
|
Comes on | DTC stored | |
| P0741 | Torque Converter Clutch Solenoid Performance (Shift Solenoid Valve SL) |
|
Comes on | DTC stored | |
| P0746 | Pressure Control Solenoid "A" Performance (Shift Solenoid Valve SL1) |
|
Comes on | DTC stored | |
| P0748 | Pressure Control Solenoid "A" Electrical (Shift Solenoid Valve SL1) |
|
Comes on | DTC stored | |
| P0776 | Pressure Control Solenoid "B" Performance (Shift Solenoid Valve SL2) |
|
Comes on | DTC stored | |
| P0778 | Pressure Control Solenoid "B" Electrical (Shift Solenoid Valve SL2) |
|
Comes on | DTC stored | |
| P0791 | Intermediate Shaft Speed Sensor "A" Circuit |
|
Comes on | DTC stored | |
| P0793 | Intermediate Shaft Speed Sensor "A" |
|
Comes on | DTC stored | |
| P0796 | Pressure Control Solenoid "C" Performance (Shift Solenoid Valve SL3) |
|
Comes on | DTC stored | |
| P0798 | Pressure Control Solenoid "C" Electrical (Shift Solenoid Valve SL3) |
|
Comes on | DTC stored | |
| P0872 | Transmission Fluid Pressure Sensor/ Switch "C" Circuit Low |
|
- | DTC stored | |
| P0873 | Transmission Fluid Pressure Sensor / Switch "C" Circuit High |
|
- | DTC stored | |
| P0877 | Transmission Fluid Pressure Sensor / Switch "D" Circuit Low |
|
- | DTC stored | |
| P0878 | Transmission Fluid Pressure Sensor/Switch "D" Circuit High |
|
- | DTC stored | |
| P0989 | Transmission Fluid Pressure Sensor / Switch "E" Circuit Low |
|
Comes on | DTC stored | |
| P0990 | Transmission Fluid Pressure Sensor / Switch "E" Circuit High |
|
Comes on | DTC stored | |
| P2714 | Pressure Control Solenoid "D" Performance (Shift Solenoid Valve SLT) |
|
Comes on | DTC stored | |
| P2716 | Pressure Control Solenoid "D" Electrical (Shift Solenoid Valve SLT) |
|
Comes on | DTC stored | |
| P2757 | Torque Converter Clutch Pressure Control Solenoid Performance (Shift Solenoid Valve SLU) |
|
Comes on | DTC stored | |
| P2759 | Torque Converter Clutch Pressure Control Solenoid Control Circuit Electrical (Shift Solenoid Valve SLU) |
|
Comes on | DTC stored | |
| P2769 | Short in Torque Converter Clutch Solenoid Circuit (Shift Solenoid Valve SL) |
|
Comes on | DTC stored | |
| P2770 | Open in Torque Converter Clutch Solenoid Circuit (Shift Solenoid Valve SL) |
|
Comes on | DTC stored | |
| P2808 | Pressure Control Solenoid "G" Performance (Shift Solenoid Valve SL4) |
|
Comes on | DTC stored | |
| P2810 | Pressure Control Solenoid "G" Electrical (Shift Solenoid Valve SL4) |
|
Comes on | DTC stored | |
| U0100 | Lost Communication with ECM / PCM "A" | TCM | Comes on | DTC stored | |
HINT:
|
|||||
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.
