SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLEXUS2007ES 350REPAIR AND DIAGNOSISBODY & FRAMESEATSSEATSEAT MEMORY SWITCHREMOVAL
2007 Lexus ES 350

Seat Memory Switch: Removal

2007 Lexus ES 350SECTION Removal
  1. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG  (See ON-VEHICLE INSPECTION )
  2. REMOVE FRONT DOOR ARMREST BASE PANEL ASSEMBLY  (See DISASSEMBLY )
  3. REMOVE COURTESY LIGHT ASSEMBLY  (See DISASSEMBLY )
  4. REMOVE DOOR ARMREST COVER  (See DISASSEMBLY )
  5. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY  (See DISASSEMBLY )
  6. REMOVE FRONT DOOR INNER GLASS WEATHERSTRIP  (See DISASSEMBLY )
  7. REMOVE SEAT MEMORY SWITCH 
    1. Remove the 2 screws.
    2. Disengage the 4 claws of the inside handle.

      HINT:

      The inside handle cannot be removed from the trim board sub-assembly.

      Fig 1: Identifying Claws Of Inside Handle
      G05254097Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disengage the 4 claws, and remove the seat memory switch.
      Fig 2: Identifying Claws And Seat Memory Switch
      G05254098Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.