Service Data

2007 Lexus ES 350SECTION Service Data
BRAKE - SERVICE DATA

Brake pedal height   129.9 to 139.9 mm (5.114 to 5.508 in.)
Standard stop light switch clearance   1.5 to 2.5 mm (0.059 to 0.098 in.)
Brake pedal free play   1.0 to 6.0 mm (0.039 to 0.236 in.)
Brake pedal reserve distance from dash panel at 500 N (51 kgf, 112 lbf)   61 mm (2.402 in.)
Front brake pad lining thickness Standard 12.0 mm (0472 in.)
Minimum 1.0 mm (0.039 in.)
Front brake disc thickness Standard 28.0 mm (1.102 in.)
Minimum 25.0 mm (0.983 in.)
Front brake disc runout Maximum 0.05 mm (0.0020 in.)
Rear disc brake pad lining thickness Standard 11.0 mm (0.433 in.)
Minimum 1.0 mm (0.039 in.)
Rear brake disc thickness Standard 10.0 mm (0.390 in.)
Minimum 8.5 mm (0.334 in.)
Rear brake disc runout Maximum 0.15 mm (0.0059 in.)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.