Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSLEXUS2007ES 350REPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMESEATSSEATFRONT SEAT ASSEMBLYINSTALLATION

2007 Lexus ES 350

Front Seat Assembly: Installation

2007 Lexus ES 350SECTION Installation

INSTALL FRONT SEAT ASSEMBLY
1. Place the seat in the cabin.
2. Connect the connectors under the seat.
3. Connect the negative (-) battery terminal.
4. Move the front seat assembly fully forward by operating the slide and vertical power seat switch knob.
  NOTE: Check that the seat is locked.
5. Temporarily install the front side of the front seat assembly with the 2 bolts.
6. Move the front seat assembly fully forward by operating the slide and vertical power seat switch knob.
  NOTE: Check that the seat is locked.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.