Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSLEXUS2007ES 350REPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEMIRRORSMIRROROUTER MIRROR SWITCHINSPECTION

2007 Lexus ES 350

Outer Mirror Switch: Inspection

2007 Lexus ES 350SECTION Inspection

INSPECT OUTER MIRROR SWITCH

Inspect the outer mirror switch.

Measure the resistance according to the value(s) in the table below when the switch is operated.

Standard resistance:

Select "L" on the left/right adjustment switch

RESISTANCE SPECIFICATION

Tester Connection	Switch Position	Specified Condition
7 - 9	UP	100 Ω
	DOWN	470 Ω
	LEFT	800 Ω
	RIGHT	250 Ω

Select "R" on the left/right adjustment, switch

RESISTANCE SPECIFICATION

Tester Connection	Switch Position	Specified Condition
7 - 9	UP	100 Ω
	DOWN	470 Ω
	LEFT	800 Ω
	RIGHT	250 Ω

Fig 1: Identifying Outer Mirror Switch Connector Terminals

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.