Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLEXUS2007ES 350REPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEEXTERIOR BODY PANELS(DOOR / HATCH)FUEL LID OPENER MOTOR ASSEMBLYINSPECTION
2007 Lexus ES 350
Fuel Lid Opener Motor Assembly: Inspection
2007 Lexus ES 350SECTION Inspection
- INSPECT FUEL LID OPENER MOTOR ASSEMBLY
- Apply battery voltage to the lock terminals and check that the motor operates and the shaft moves in the open direction.
OK
MEASUREMENT CONDITIONMeasurement Condition Specified Condition Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1 Motor operates and shaft moves in open direction - Measure the shaft stroke.
Standard:
10.3 mm (0.406 in.) or more
If the result is not as specified, replace the motor assembly.
- Apply battery voltage to the lock terminals and check that the motor operates and the shaft moves in the open direction.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.