SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLEXUS2007ES 350REPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTWARNING SYSTEMSPARK ASSIST / MONITORINGINTUITIVE PARKING ASSIST SYSTEMCUSTOMIZE PARAMETERS
2007 Lexus ES 350

Customize Parameters

2007 Lexus ES 350SECTION Customize Parameters
  1. CUSTOMIZE PARAMETERS (INTELLIGENT TESTER) 
    1. The following items can be customized:
      NOTE:
      • When the customer requests a change in a function, first make sure that the function can be customized.
      • Be sure to make a note of the current settings before customizing.
      • When troubleshooting a function, first make sure that the function is set to the default setting.

      Warning 

      WARNING CONTENT REFERENCE CHART

      DISPLAY DEFAULT CONTENTS SETTING
      RR SENSOR RANGE WIDE Function to set buzzer activation range (for rear center sensors) NARROW/WIDE
      KEEP SENSE BUZ AVAIL Function to make buzzer sound when distance between vehicle and obstacle does not change for more than 3 seconds NOT AVAIL/AVAIL
      F & R BUZZER VOL M2 Function to change volume of buzzer L/M1/M2/M3/H

      Sensor: 

      SENSOR CONTENT REFERENCE CHART

      DISPLAY DEFAULT CONTENTS SETTING
      SENSOR COND/N AVAIL Function to make sensors available when shift position is N NOT AVAIL/AVAIL

      Display: 

      DISPLAY CONTENT REFERENCE CHART

      DISPLAY DEFAULT CONTENTS SETTING
      DISPLAY MODE ALL Function to change display mode ALL/UNDISP
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.