Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLEXUS2006RX 400H AWD V6-3.3L (3MZ-FE) HYBRIDREPAIR AND DIAGNOSISSTEERING AND SUSPENSIONSTEERINGTESTING AND INSPECTIONSCAN TOOL TESTING AND PROCEDURESFREEZE FRAME DATA
2006 Lexus RX 400h AWD V6-3.3L (3MZ-FE) Hybrid
Freeze Frame Data
2006 Lexus RX 400h AWD V6-3.3L (3MZ-FE) HybridSECTION Freeze Frame Data
FREEZE FRAME DATA
1. FREEZE FRAME DATA
NOTICE:
^ It is difficult to show the specified values (judgement values) clearly because freeze frame data values change significantly due to differences in measurement conditions, surroundings, or vehicle conditions. For this reason, there may be a problem even when the values are within specifications.
^ Turn the ignition switch on and park the vehicle on level ground. Check the freeze frame data by using the intelligent tester.
a. Connect the intelligent tester to the DLC3.
b. Turn the ignition switch on and check the freeze frame data by following the prompts on the intelligent tester display
^ 1 NG (1): Power steering converter has an internal failure./NG (2): Power steering converter has an external failure.
1. FREEZE FRAME DATA
NOTICE:
^ It is difficult to show the specified values (judgement values) clearly because freeze frame data values change significantly due to differences in measurement conditions, surroundings, or vehicle conditions. For this reason, there may be a problem even when the values are within specifications.
^ Turn the ignition switch on and park the vehicle on level ground. Check the freeze frame data by using the intelligent tester.
a. Connect the intelligent tester to the DLC3.
b. Turn the ignition switch on and check the freeze frame data by following the prompts on the intelligent tester display
^ 1 NG (1): Power steering converter has an internal failure./NG (2): Power steering converter has an external failure.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.