Engine Control System

2006 Lexus RX 400h AWD V6-3.3L (3MZ-FE) HybridSECTION Engine Control System
CHECK MIL (Malfunction Indicator Lamp)

a. The MIL is illuminated when the engine switch is first turned on (the engine is not running).
b. The MIL should turn OFF when the engine is started. If the MIL remains illuminated, the diagnosis system has detected malfunction or abnormality in the system.

HINT: If the MIL is not illuminated when the engine switch is first turned to on, check the MIL circuit.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.