Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLEXUS2006RX 400H AWD V6-3.3L (3MZ-FE) HYBRIDREPAIR AND DIAGNOSISLIGHTING AND HORNSCOURTESY LAMPTESTING AND INSPECTIONSTEP LIGHT ASSEMBLY
2006 Lexus RX 400h AWD V6-3.3L (3MZ-FE) Hybrid
Step Light Assembly
2006 Lexus RX 400h AWD V6-3.3L (3MZ-FE) HybridSECTION Step Light Assembly
STEP LIGHT ASSEMBLY
INSPECTION
1. INSPECT STEP LIGHT
a. Remove the step light.
b. Connect the battery positive (+) lead to terminal 2 and negative (-) lead to terminal 1.
c. Check that the light comes on.
OK: Comes on
If the light does not come on, replace the light.
INSPECTION
1. INSPECT STEP LIGHT
a. Remove the step light.
b. Connect the battery positive (+) lead to terminal 2 and negative (-) lead to terminal 1.
c. Check that the light comes on.
OK: Comes on
If the light does not come on, replace the light.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.