Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLEXUS2006RX 400H AWD V6-3.3L (3MZ-FE) HYBRIDREPAIR AND DIAGNOSISBRAKES AND TRACTION CONTROLANTILOCK BRAKES / TRACTION CONTROL SYSTEMSTESTING AND INSPECTIONSCAN TOOL TESTING AND PROCEDURESDATA LIST/ACTIVE TEST
2006 Lexus RX 400h AWD V6-3.3L (3MZ-FE) Hybrid
Data List/Active Test
2006 Lexus RX 400h AWD V6-3.3L (3MZ-FE) HybridSECTION Data List/Active Test
DATA LIST/ACTIVE TEST
1. DATA LIST
HINT: With the intelligent tester connected to the DLC3 and the ignition switch ON, the ECB, ABS, and VSC data list can be displayed. Follow the prompts on the tester screen to access the DATA LIST.
2. ACTIVE TEST
HINT: Performing the ACTIVE TEST using the intelligent tester allows the relay, actuator, etc. to operate without removing any parts. Performing the ACTIVE TEST as the first step of troubleshooting is one of the methods to shorten labor time. It is possible to display the DATA LIST during the ACTIVE TEST.
a. Connect the intelligent tester to the DLC3.
b. Turn the ignition switch On.
c. According to the display on the tester, perform the ACTIVE TEST.
HINT: The ignition switch must be turned to the ON position to proceed to the ACTIVE TEST using the intelligent tester.
1. DATA LIST
HINT: With the intelligent tester connected to the DLC3 and the ignition switch ON, the ECB, ABS, and VSC data list can be displayed. Follow the prompts on the tester screen to access the DATA LIST.
ABS/VSC/TRAC:
ABS/VSC/TRAC:
ABS/VSC/TRAC:
ABS/VSC/TRAC:
2. ACTIVE TEST
HINT: Performing the ACTIVE TEST using the intelligent tester allows the relay, actuator, etc. to operate without removing any parts. Performing the ACTIVE TEST as the first step of troubleshooting is one of the methods to shorten labor time. It is possible to display the DATA LIST during the ACTIVE TEST.
a. Connect the intelligent tester to the DLC3.
b. Turn the ignition switch On.
c. According to the display on the tester, perform the ACTIVE TEST.
HINT: The ignition switch must be turned to the ON position to proceed to the ACTIVE TEST using the intelligent tester.
ABS/VSC/TRAC:
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.