Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Shift Lever Position
Inspect and adjust shift lever position. When shifting shift lever from "N" position to other positions, check that lever can be shifted smoothly and accurately to each position and that position indicator is aligned with correct position. If indicator is not aligned with correct position, carry out following procedures.
- Inspect shift lever position:
- Ensure shifting lever moves smoothly and can be operated moderately from "P" to "R" with ignition switch ON and brake pedal depressed. See Fig 1.
- Start engine and ensure that vehicle moves forward when shifting lever from "N" to "D" position and reverses when shifting it to "R" position.
- Adjusting shift lever position:
- Loosen nut on shift lever. See Fig 2.
- Push control shaft fully rearward. See Fig 3.
- Return control shaft lever 2 notches to "N" position.
- Set shift lever to "N" position.
- While holding shift lever slightly toward "R" position side, tighten shift lever nut to specification. See TORQUE SPECIFICATIONSΒ .
- Start engine and ensure that vehicle moves forward when shifting lever from "N" to "D" position and reverses when shifting it to "R" position.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
