Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Anti-Theft Indicator
Disconnect indicator light 7-pin connector. Connect battery positive lead to terminal No. 2 (Violet wire) and negative battery lead to terminal No. 5 (White/Black wire). See Fig 1. If indicator light does not come on, replace light and retest system operation. If indicator light comes on, repair or replace wire harness and connectors between indicator light, body ECU No. 1 and combination meter (instrument cluster).
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.