Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLAND ROVER2010LR4 (LA) V8-5.0LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSSUSPENSIONSYSTEM SPECIFICATIONSSUSPENSION SYSTEM SPECIFICATIONS
2010 Land Rover LR4 (LA) V8-5.0L
Suspension System Specifications
2010 Land Rover LR4 (LA) V8-5.0LSECTION Suspension System Specifications
Specifications
CAUTION: When checking or adjusting front or rear steering geometry, the vehicle must either have a full fuel tank or have sufficient weight placed in the vehicle's load space to give the equivalent weight of a full fuel tank. The weight must be evenly distributed at the front and the right hand side of the load space. The fuel tank capacity is 86.3 liters (18.9 Imperial gallons) (22.7 US gallons). Depending on the amount of fuel in the tank, calculate the amount of weight which must be added:
- 1 litre of fuel weighs 0.8 kg (1.7 pounds)
- 1 Imperial gallon of fuel weighs 3.6 kg (8.0 pounds)
- 1 US gallon of fuel weighs 3.0 kg (6.7 pounds)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.