Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLAND ROVER2009LR3 (LA) V8-4.4LREPAIR AND DIAGNOSISBODY AND FRAMEROOF AND ASSOCIATED COMPONENTSSUNROOF / MOONROOFSERVICE AND REPAIRROOF OPENING PANEL GLASS
2009 Land Rover LR3 (LA) V8-4.4L
Roof Opening Panel Glass
2009 Land Rover LR3 (LA) V8-4.4LSECTION Roof Opening Panel Glass
Roof Opening Panel Glass
Removal
1. Open the roof opening panel blind.
2. Open the roof opening panel to the tilt position.
3. Remove the roof opening panel glass.
^ Remove the 3 Torx screws.
^ Repeat the above procedure for the other side.
Installation
1. Install the roof opening panel glass.
^ Install the Torx bolts, but do not tighten fully at this stage.
2. Align the roof opening panel glass.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.