Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLAND ROVER2009LR3 (LA) V8-4.4LREPAIR AND DIAGNOSISBODY AND FRAMELOCKSPOWER LOCKSSPECIFICATIONS
2009 Land Rover LR3 (LA) V8-4.4L
Power Locks: Specifications
2009 Land Rover LR3 (LA) V8-4.4LSECTION Specifications
Torque Specifications
Hood Latch Release Handle Bolt 5 Nm (3.7 ft. lbs.)
Liftgate Latch Actuator Bolts 10 Nm (7 ft. lbs.)
Liftgate Latch Torx Screws 10 Nm (7 ft. lbs.)
Liftgate Striker Bolts 25 Nm (18 ft. lbs.)
Tailgate Latch Striker Bolts 25 Nm (18 ft. lbs.)
Tailgate Latch Torx Screws 25 Nm (18 ft. lbs.)
Front Door Latch Torx Screws 10 Nm (7 ft. lbs.)
Rear Door Latch Torx Screws 10 Nm (7 ft. lbs.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.