Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2024NIRO EXREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTDRIVERS ASSISTANCE SYSTEMS - ADASADVANCED DRIVER ASSISTANCE SYSTEM PARKING DIAGNOSIS (HEV) (1 OF 2)DTC C1376-96: FRONT SIDE LEFT ULTRASONIC HARDWARE FAILURESYSTEM INSPECTIONVISUAL INSPECTIONINSPECTION PROCEDURE
2024 Kia Niro EX
Inspection Procedure
2024 Kia Niro EXSECTION Inspection Procedure
- Ignition "OFF".
- Check for proper installed condition of PDW sensor.
- Remove any dirt or contamination on/and around PDW sensor area.
- Check for correct type of sensor installation.
- Check for any damage or distortion of sensor and sensor bracket.
- Check the PDW sensor.
Good
- Go to "WIRING INSPECTION " procedure.
No Good
- Repair as necessary and then go to "VERIFICATION OF REPAIR " procedure.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.