SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2024NIRO EXREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTCOLLISION/AVOIDANCEREAR CORNER RADAR DIAGNOSIS (HEV) (2 OF 2)DTC C2708-54: CONTROL MODULE MISSING CALIBRATION (REAR LEFT)SYSTEM INSPECTION
2024 Kia Niro EX

System Inspection

2024 Kia Niro EXSECTION System Inspection
Inspection Condition Inspection Procedure Reference
  1. Ignition "OFF".
  1. Check bumper cleanliness: If bumper is contaminated with snow or dust, performance will be impaired.
  2. Check the condition around the bumper: If metal stickers or foreign substances are attached around the radar, a warning lamp may occur.
  3. Check bumper shape or mounting status: Warning lamps may occur if bumpers or radars are not properly installed after an accident.
  4. Check the bumper, bracket, or radar when a fault code occurs.
    • Bumper: Mounted, external deformation of the bumper external deformation.
    • Bracket: Mounting status, bracket deformation.
    • Radar: Poor radar nut engagement, radar foreign material contamination.
 -

Good 

No Good 

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.