DTC Information: DTC Detecting Condition

2024 Kia Niro EXSECTION DTC Detecting Condition
Item Detecting Condition Possible Cause
DTC Strategy
  • Monitoring CAN communication
  • Poor connection
  • CAN communication circuit (open, short)
    • CAN high line open
    • CAN low line open
    • CAN high and low line open
    • CAN high line short to 12V battery
    • CAN low line short to 12V battery
    • CAN high, low line short to each other
    • CAN high, low line short to each other and short to ground
  • Terminating resistance faulty
  • Transmitting controller BUS off
  • Transmitting controller disconnected
  • Transmitting controller power, fuse or ground faulty
  • Transmitting controller H/W, S/W faulty
  • CAN line noise
  • IBU faulty (CAN module faulty)
  • ECM faulty (CAN module faulty)
  • ICU faulty (CAN module faulty)
Enable Condition
  • Ignition "ON"
  • Normal 12V battery voltage is 9 to 16V
Threshold Value
  • CAN high and low circuit simultaneous short to ground
  • CAN high and low circuit simultaneous short to 12V battery
Detecting Time
  • 1.9s
DTC Erasing
  • Receives the normal CAN data
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.