Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2022 Kia Telluride EX, FWDFACTORY OEM SERVICE PROCEDURE
DTC Index
DTC INDEX
| DTC | Description |
|---|---|
| DTC P0335 | 00: Crankshaft Position Sensor 'A' Circuit |
| DTC P0336 | 00: Crankshaft Position Sensor 'A' Circuit Range/Performance |
| DTC P0340 | 00: Camshaft Position Sensor 'A' (Intake) Circuit (Bank 1 or Single Sensor) |
| DTC P0341 | 00: Camshaft Position Sensor 'A'(Intake) Circuit Range/Performance (Bank 1) |
| DTC P0345 | 00: Camshaft Position Sensor 'A(Intake)' Circuit (Bank 2) |
| DTC P0346 | 00: Camshaft Position Sensor 'A'(Intake) Circuit Range/Performance (Bank 2) |
| DTC P0365 | 00: Camshaft Position Sensor 'B'(Exhaust) Circuit Malfunction (Bank 1) |
| DTC P0366 | 00: Camshaft Position Sensor 'B'(Exhaust) Circuit Range/Performance (Bank 1) |
| DTC P0390 | 00: Camshaft Position Sensor 'B' Circuit |
| DTC P0391 | 00: Camshaft Position Sensor 'B' Circuit Range/Performance |
| DTC P039B | 00: Cylinder 1 Pressure Too High |
| DTC P03A5 | 00: Cylinder 2 Pressure Too High |
| DTC P03AF | 00: Cylinder 3 Pressure Too High |
| DTC P03B9 | 00: Cylinder 4 Pressure Too High |
| DTC P03C3 | 00: Cylinder 5 Pressure Too High |
| DTC P03CD | 00: Cylinder 6 Pressure Too High |
| DTC P0420 | 00: Catalyst System Efficiency Below Threshold (Bank 1) |
| DTC P0430 | 00: Catalyst System Efficiency Below Threshold (Bank 2) |
| DTC P0441 | 00: Evaporative Emission System Incorrect Purge Flow |
| DTC P0442 | 00: Evaporative Emission System-Leak detected (small leak) |
| DTC P0444 | 00: Evaporative Emission System-Purge Control Valve Circuit Open |
| DTC P0445 | 00: Evaporative Emission System-Purge Control Valve Circuit Shorted |
| DTC P0447 | 00: Evaporative Emission System - Vent Control Circuit Open |
| DTC P0448 | 00: Evaporative Emission System - Vent Control Circuit Shorted |
| DTC P0449 | 00: Evaporative Emission System - Vent Valve/Solenoid Circuit |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
