DTC Information: DTC Detecting Condition

2021 Kia Sedona EXSECTION DTC Detecting Condition
Item Detecting Condition Possible cause
DTC Strategy
  • Electrical Check
  • Poor connection or damaged harness
  • Short circuit to battery
  • Faulty BPS
  • ECM
Enable Conditions
  • Battery voltage is between 10V and 16V
Case 1 Threshold Value
  • BARO sensor voltage is greater than 4.92V
  • Short circuit to battery
Diagnosis Time
  • Continuous
Case 2 Threshold Value
  • Error bit information from Hardware circuit
  • Internal sensor error
Diagnosis Time
  • Immediately
MIL ON Condition
  • 2 driving cycles
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.